[Astrotek] 4+1 USB Port PCI Card 32-bit 33Mhz Interface, Plug and Play and Hot Swapping, 1.5/12/480 Mbps.
Astrotek 4+1 USB Port PCI Card: VT6212 chipset, 4 x USB 2.0 Port External + 1 x Internal USB 2.0 Port (Shared), Max. 480 Mb/s transfer rate per port, PCI specification v2.2 compliant, USB 2.0 specification rev. 2.0 compliant, USB 2.0 EHCI rev. 1.0 & UHCI rev. 1.1 compliant, 4 downstream ports in the root hub with integrated physical layer transceivers, PCI Power Management Interface specification v.1.1 compliant, 4 DMA engines with pipelined control for data transfer, Dynamic clock stop control for power consumption reduction, Drivers support Windows 98SE or above
Astrotek PCI Express USB3.0 1x Port Card, with standard-height and low-profile bracketsSpecifications :- Chipset : Fresco FL1000 - PCI Express Card Specification rev. 1.1 compliant- PCI Express x1 Lane transfer rate- PCI Bus Power Management Interface Specification rev. 1.2 compliant - 1 x USB 3.0 Port- Max. 5 Gb/s transfer rate per port - USB specification 3.0 rev. 1.0 compliant- Supports USB 3.0, USB 2.0 & USB 1.1 devices- Supports USB data rate 5Gb/s, 480Mb/s, 12Mb/s & 1.5Mb/s - Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 0.95- Over-current sensing & Fuse Protection - Supports Hot Swap, Plug & Play - Low Profile support (Optional)- Drivers support Windows XP or above- Linux Kernel 2.6.31 native supportPackings :- 1 x PCI Express Card- 1 x Driver CD- 1 x User Manual
Astrotek PCI-Express x1 USB 3.0 2 Port Card , with standard-height and low-profile bracketsSpecifications :- Chipset : NEC 720200- 2 x USB 3.0 External Port, Max. 5 Gb/s transfer rate per port- Supports Super-speed (5 Gb/s), High-speed (480 Mb/s), Full-speed (12 Mb/s), & Low-speed (1.5 Mb/s)- Supports USB 3.0, USB 2.0 & USB 1.1 devices- Compliant with Intel xHCI (eXtensible Host Controller Interface) specifications Revision 0.95- On-board 12V to 5V/2A regulation for each USB 3.0 5V/900mA power consumption- Over-current sensing & Fuse Protection for each port- Supports Hot Swap, Plug & Play- Drivers support Windows XP or above- Linux Kernel 2.6.31 native support