|
|
![[Astrotek] 4+1 USB Port PCI Card 32-bit 33Mhz Interface, Plug and Play and Hot Swapping, 1.5/12/480 Mbps.](/site/inctechnology/images/thumb/016_thumb.jpg) |
Astrotek 4+1 USB Port PCI Card: VT6212 chipset, 4 x USB 2.0 Port External + 1 x Internal USB 2.0 Port (Shared), Max. 480 Mb/s transfer rate per port, PCI specification v2.2 compliant, USB 2.0 specification rev. 2.0 compliant, USB 2.0 EHCI rev. 1.0 & UHCI rev. 1.1 compliant, 4 downstream ports in the root hub with integrated physical layer transceivers, PCI Power Management Interface specification v.1.1 compliant, 4 DMA engines with pipelined control for data transfer, Dynamic clock stop control for power consumption reduction, Drivers support Windows 98SE or above
|
NZ $20.00
excl GST
|
|
![[Astrotek] IEEE1394a (Firewire400) PCI Card, 3x External + 1x Internal ports, with standard-height and low-profile brackets](/site/inctechnology/images/thumb/017_thumb.jpg) |
Astrotek IEEE1394a (Firewire400) PCI Card, 3 x 1394a External Port + 1 x Internal Port (Shared), PCI specification v2.2 compliant, Max. 400 Mb/s transfer rate per port, IEEE 1394a Open HCI specification v1.0 & v1.1 compliant, 32-bit CRC generator and checker for transmit & receive data, On-chip 2 K isochronous & 2 K asynchronous transmit & receive FIFO, 8 isochronous transmit / receive contexts, 3-deep physical post-write queue & 2-deep physical response queue, Dual buffer mode enhancements, Skip Processing enhancements, Block read request handling, Ack_tardy processing, High performance bus mastering support, Byte alignment to run in little-endian (x86/PCI) enivornment, ACPI & PCI Bus Power Management 1.1 compliant, Support power states D0, D1, D2, D3hot, & D3cold, No Drivers need for Windows 98SE or above, comes with standard-height and low-profile brackets
|
NZ $29.00
excl GST
|
|
![[Astrotek] PCI Serial & Parallel Card, 3.3v/5v Multi-I/O Expansion Card with 1x Parallel Port & 2x Serial Ports](/site/inctechnology/images/thumb/018_thumb.jpg) |
Astrotek PCI Serial & Parallel Card, 2 x Fast Serial RS232 DB9 Port, 1 x DB25 Printer Port (DB25 via Cable & Bracket), Supports both PCI 3.3V and 5V, PCI specification v2.3 compliant, PCI compatible Dual UART (16C450/550/552), Serial Port Data rates up to 4 Mbps per port, 16-byte transmit-receive FIFO (UART), Programmable baud rate generator, Modem control signals, 5, 6, 7, 8 bit characters selection, 1, 2 stop bit, Even, Odd, No Parity, or Force Parity generations, PCI compatible IEEE 1284 Printer Port, Supports SPP, Nibble, Byte, PS2, EPP, ECP Multi-mode, Fast data rate up to 2 MB/s, Drivers support Windows 98SE or above
|
NZ $35.00
excl GST
|
|
![[Astrotek] PCI Express USB3.0 1x Port Card, with standard-height and low-profile brackets](/site/inctechnology/images/thumb/a005_thumb.jpg) |
Astrotek PCI Express USB3.0 1x Port Card, with standard-height and low-profile bracketsSpecifications :- Chipset : Fresco FL1000 - PCI Express Card Specification rev. 1.1 compliant- PCI Express x1 Lane transfer rate- PCI Bus Power Management Interface Specification rev. 1.2 compliant - 1 x USB 3.0 Port- Max. 5 Gb/s transfer rate per port - USB specification 3.0 rev. 1.0 compliant- Supports USB 3.0, USB 2.0 & USB 1.1 devices- Supports USB data rate 5Gb/s, 480Mb/s, 12Mb/s & 1.5Mb/s - Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 0.95- Over-current sensing & Fuse Protection - Supports Hot Swap, Plug & Play - Low Profile support (Optional)- Drivers support Windows XP or above- Linux Kernel 2.6.31 native supportPackings :- 1 x PCI Express Card- 1 x Driver CD- 1 x User Manual
|
NZ $49.00
excl GST
|
|
![[Astrotek] PCI Express USB3.0 1x Internal Port Card , with standard-height and low-profile brackets, compatiable with AT-U3H](/site/inctechnology/images/thumb/a006_thumb.jpg) |
Astrotek PCI Express USB3.0 1x Internal Port Card , with standard-height and low-profile brackets- compatiable with AT-U3HUBFBSpecifications :- Chipset : Fresco FL1000 - PCI Express Card Specification rev. 1.1 compliant- PCI Express x1 Lane transfer rate- PCI Bus Power Management Interface Specification rev. 1.2 compliant - 1 x Internal USB 3.0 Port- Max. 5 Gb/s transfer rate per port - USB specification 3.0 rev. 1.0 compliant- Supports USB 3.0, USB 2.0 & USB 1.1 devices- Supports USB data rate 5Gb/s, 480Mb/s, 12Mb/s & 1.5Mb/s - Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 0.95 - Over-current sensing & Fuse Protection- Supports Hot Swap, Plug & Play- Low Profile support (Optional) - Drivers support Windows XP or above- Linux Kernel 2.6.31 native support Packings :- 1 x PCI Express Card- 1 x Driver CD- 1 x User Manual
|
NZ $49.00
excl GST
|
|
![[Astrotek] PCI-Express x1 USB 3.0 2 Port Card , with standard-height and low-profile brackets](/site/inctechnology/images/thumb/019_thumb.jpg) |
Astrotek PCI-Express x1 USB 3.0 2 Port Card , with standard-height and low-profile bracketsSpecifications :- Chipset : NEC 720200- 2 x USB 3.0 External Port, Max. 5 Gb/s transfer rate per port- Supports Super-speed (5 Gb/s), High-speed (480 Mb/s), Full-speed (12 Mb/s), & Low-speed (1.5 Mb/s)- Supports USB 3.0, USB 2.0 & USB 1.1 devices- Compliant with Intel xHCI (eXtensible Host Controller Interface) specifications Revision 0.95- On-board 12V to 5V/2A regulation for each USB 3.0 5V/900mA power consumption- Over-current sensing & Fuse Protection for each port- Supports Hot Swap, Plug & Play- Drivers support Windows XP or above- Linux Kernel 2.6.31 native support
|
NZ $69.00
excl GST
|
|
|
